Envoyer le message
Maison
Produits
Au sujet de nous
Visite d'usine
Contrôle de qualité
Contactez-nous
Demande de soumission
Nouvelles
guangqing(anhui)gas technologies co.,ltd.
Aperçu ProduitsKits de réparation d'IMPCO

Kits de réparation standard du carburateur IMPCO de la soupape à air RKCA55

Chine guangqing(anhui)gas technologies co.,ltd. certifications
Chine guangqing(anhui)gas technologies co.,ltd. certifications
Je suis en ligne une discussion en ligne

Kits de réparation standard du carburateur IMPCO de la soupape à air RKCA55

Air Valve RKCA55 Standard Carburetor IMPCO Repair Kits
Air Valve RKCA55 Standard Carburetor IMPCO Repair Kits

Image Grand :  Kits de réparation standard du carburateur IMPCO de la soupape à air RKCA55

Détails sur le produit:
Lieu d'origine: LES Etats-Unis
Nom de marque: IMPCO
Numéro de modèle: RK-COBRA
Conditions de paiement et expédition:
Quantité de commande min: 24
Prix: Depending on quantity
Détails d'emballage: Carton
Délai de livraison: 8 semaines
Conditions de paiement: T/T
Capacité d'approvisionnement: 1200pcs par 8weeks
Description de produit détaillée
Nom de produit: Kit de réparation numéro de la pièce: RK-CA55
Marque: IMPCO Rapport air-carburant: Norme
Surligner:

Kit standard de reconstruction du carburateur RKCA55

,

Kits de réparation de RKCA55 IMPCO

,

Kits de réparation du carburateur IMPCO

IMPCO RK-CA55 , Model CA55 Carburetor Repair Kit , Standard Air Valve
 
CA55 Standard Carburetor/MixerREPAIR KIT INSTRUCTIONS
Important: Any maintenance, service or repair should be performed by trained and experienced service technicians. Proper tools and equipment should be used to prevent injury to the servicing technician, property or system components. Service repairs should always be performed in a safe environment and the technician should always wear protective clothing to prevent injury.
The IMPCO PPI-55 repair kit instructions will provide the technician information to successfully repair the CA55 Carburetor. Always inspect the major casting pieces for damage, corrosion or cracks before attempting a service repair. Be sure the repair kit part number you are using is correct for the carburetor/mixer being serviced.
 
REBUILD INSTRUCTIONS Disassembly
 
Kits de réparation standard du carburateur IMPCO de la soupape à air RKCA55 0
1. Remove the carburetor from the engine, then remove 4 screws (Sl-3) holding throttle body to mixer bowl.
 
Kits de réparation standard du carburateur IMPCO de la soupape à air RKCA55 1
2. Remove the throttle body. Note that the gasket retains idle cutoff piston in place (shown under finger tip).
Note: Not all 55 Series Carburetors are equipped with the cutoff piston.
 
Kits de réparation standard du carburateur IMPCO de la soupape à air RKCA55 2
3. Remove the gasket which will release the Idle cutoff piston and spring.
 
Kits de réparation standard du carburateur IMPCO de la soupape à air RKCA55 3
 
4. Remove the check valve plate and air valve spring. Lift the air/gas valve from mixer bowl.
Kits de réparation standard du carburateur IMPCO de la soupape à air RKCA55 4
 
5. Clean the mixer bowl assembly in safety solvent. Do not use carburetor cleaner as it will attack synthetic rubber seals.
 
 

Reassembly

Kits de réparation standard du carburateur IMPCO de la soupape à air RKCA55 5

1. The RK-CA55 kit includes:
• AV1-14925 Air/Gas Valve Assy (RK-55-2 kit supplies the AV1-14926 “lean” valve.)
• AP2-14700 Plate, Check Valve Assy
• P4-1 Piston, Idle Cutoff
• S2-44 Spring, Idle Cutoff
• S1-3 Screws (4), 10-24 x 5/8”
• G1-92 Gasket
• PPI-55 Repair Kit Instructions
 
Kits de réparation standard du carburateur IMPCO de la soupape à air RKCA55 6
2. Place the air/gas valve assembly in the mixer bowl.
 
Kits de réparation standard du carburateur IMPCO de la soupape à air RKCA55 7
3. Place the air/valve spring and check valve plate in the mixer bowl.
 
Kits de réparation standard du carburateur IMPCO de la soupape à air RKCA55 8
4. This illustration shows the mixer bowl assembled with the check valve assembly centered towards air horn. The idle cutoff piston and spring are shown in place ready for assembly to the mixer bowl.
Kits de réparation standard du carburateur IMPCO de la soupape à air RKCA55 9
5.Place the gasket on the throttle body retainingthe idle cutoff piston in its recess (under thumb,as shown in the illustration).
 
Kits de réparation standard du carburateur IMPCO de la soupape à air RKCA55 10
6.While holding the gasket and idle cutoff pistonin place, turn the throttle body over. Note cutoutof the gasket designed to clear the check valveassembly on plate.
 
Kits de réparation standard du carburateur IMPCO de la soupape à air RKCA55 11
7.Lower the throttle body gently onto the mixerbowl making sure idle cutoff piston does notescape from its recess. Once the throttle body isflush on the mixer bowl, align the holes and startthe 4 screws.
 
Kits de réparation standard du carburateur IMPCO de la soupape à air RKCA55 12
8.Tighten 4 screws to 30 in lbs (3.4 N•m)
Kits de réparation standard du carburateur IMPCO de la soupape à air RKCA55 13

Coordonnées
guangqing(anhui)gas technologies co.,ltd.

Personne à contacter: Mrs. Carrie Liu

Téléphone: +86 13855195806

Télécopieur: 86-551-63664756

Envoyez votre demande directement à nous (0 / 3000)