Aperçu Produits Pièces d'installation carburant

Pièces codées noires d'installation carburant de réparation de cobra de Diapragm Impco

Tous les produits

Pièces d'installation carburant (60)

Mélangeurs de taille moyenne de moteur d'IMPCO (18)

Grands mélangeurs de moteur d'IMPCO (14)

Régulateur d'IMPCO (6)

Régulateur de basse pression (7)

Régulateur à haute pression (3)

Kits de réparation d'IMPCO (6)

Mélangeur de gaz d'IMPCO (13)

IMPCO Lockoff (12)

Pièces d'IMPCO LPG (47)

Chine guangqing(anhui)gas technologies co.,ltd. certifications

Je suis en ligne une discussion en ligne

Pièces codées noires d'installation carburant de réparation de cobra de Diapragm Impco

Name: Pièces codées noires d'installation carburant de réparation de cobra de Diapragm Impco
Brand: IMPCO
SKU: RK-COBRA
Price: 1.00 USD
Availability: InStock
Rating: 5 (120 reviews)

Black Coded Diapragm Impco Cobra Repair Fuel System Parts

Image Grand : Pièces codées noires d'installation carburant de réparation de cobra de Diapragm Impco

Détails sur le produit:

Lieu d'origine:	LES Etats-Unis
Nom de marque:	IMPCO
Numéro de modèle:	RK-COBRA

Conditions de paiement et expédition:

Quantité de commande min:	24
Prix:	Depending on quantity
Détails d'emballage:	Carton
Délai de livraison:	8 semaines
Conditions de paiement:	T/T
Capacité d'approvisionnement:	1200pcs par 8weeks

Contact

Description de produit détaillée

Nom de produit:

Kit de réparation

numéro de la pièce:

RK-J

marque:

IMPCO

Diaphragme:

Hydrin (noir)

Surligner:

Kit de réparation de cobra d'Impco de COBRA de RK

Kit de réparation codé de cobra de Diapragm Impco

Pièces d'installation carburant de réparation de cobra

IMPCO RK-J , Model J Regulator Repair Kit , Black Coded Diapragm

The IMPCO PPI-3 repair kit instructions will provide the technician information to successfully repair the Model J regulator converter. Always inspect the major casting pieces for damage, corrosion or cracks before attempting a service repair. Be sure the repair kit part number you are using is correct for the regulator being serviced. Diaphragm is BLACK - Hydrin diaphragm material is the standard material and is well suited for the most common applications

REBUILD INSTRUCTIONS

1. Under normal conditions, installation of a complete Model J Repair Kit should be necessary only at the time of a major engine overhaul or when the converter has been out of service for an extended period of time. Each kit includes the necessary gaskets, diaphragms, seals and some replacement screws.

2. Remove the 6 screws (2) from the secondary cover assembly (3).

NOTE: Identify type and location of screws removed (i.e. Torx) to ensure the same type and size screws are returned to the correct locations during reassembly.

3. Loosen the secondary cover (3) by tapping around the circumference with a plastic screw driver handle.

4. Remove the secondary cover (3) and secondary dia-phragm (4) as a unit. Note the secondary lever (6) pro-truding through the metal tab slot of the secondary dia-phragm. Slide the cover and diaphragm toward the gas inlet to free the lever from the slotted tab of the dia-phragm. Take care not to bend the lever.

5. Remove the screw (5) retaining the secondary lever fulcrum pin.

6. Remove the secondary lever (6) and fulcrum pin (7). Set aside fulcrum pin for reassembly. Remove the secondary spring (9).

7. Turn the converter over. Remove the seven screws (20) and lift off the primary cover (19).

8. Remove the primary diaphragm (18).

9. Remove the primary valve pin (17) and spring (16).

10. Remove plate (14) and the gasket (13).

11. Remove the gasket (13) from the plate (14). Clean plate as needed to ensure a good seal with a new gas-ket.

12. Remove the primary seat (12). Clean covers (3, 14, & 19), body (10) and all other metal parts as necessary with a safety solvent as needed and allow to dry prior to reassembly. Do not use harsh solvents such as brake or carburetor cleaner on any of the non-metallic components as they will damage the material.

13. Install new primary seat (12).

14. Set new plate gasket (13) on the plate (14). The pri-mary pressure hole in the gasket must line up with the hole in the body cover plate as noted in the photo at left.

15. Place the plate (14) and gasket (13) on to the body (10) and align the screw holes.

16. Insert the new primary valve pin (17) through the spring (16) and insert into the plate (14) with the larger diame-ter end of the spring resting against the plate.

17. Set the primary diaphragm (18) in place on the plate (14). Line up the screw holes to the plate.

18. Carefully place the primary cover (19) over the dia-phragm (18). Hand-thread the screws (20) through the cover and plate (14) into the converter body (10).

19. Tighten the screws (20) to 37-43 in-lb. (4.2-4.9 N•m) in a criss-cross pattern.

20. Assemble the new secondary seat (8) and new sec-ondary lever (6) by inserting the seat retaining tip to the end opening of the lever as shown. Be sure the new seat properly locks into place.

21. Position the secondary spring (9) in place on the body (10). Place the secondary lever assembly (6 & 8) into place over the spring (9).

22. Hold the lever assembly (6 & 8) with the fulcrum pin (7) in place in its locating groove and fasten in place with the retaining screw (5).

23. Tighten the screw (5) to 29-35 in.lbs. (3.3-4.0 N•m).

24. The end of the secondary lever (6) should be 1/32" be-low the level of the body casting (10). Use a straight edge to measure. Remove and gently bend the lever if necessary to obtain the correct height.

NOTE: Bending the lever while installed may result in damage to the seat (8). Remove the lever from the body, bend, reinstall, and then re-check the height.

25. Align the secondary diaphragm (4) to the secondary lever (6) as shown. The end of the lever must protrude through the tab slot on the bottom of the new dia-phragm (4) after installation. The gap from which the link is punched should be located toward the gas inlet.

26. Install the secondary cover (3) with the six screws (2).

27. Tighten the screws (2) in a crisscross pattern to 29-35 in-lb. (3.3-4.0 N•m), to complete the installation of the repair kit components.

28. Attach a 100 psi air pressure hose to the regulator "IN-LET" fitting.

29. For models with a primer button: Depress the primer button several times. Air flow should be detected when the primer is depressed.

NOTE: Not all models include a primer button. Skip this step for models without a primer button.

30. Check the primary cover for leaks using liquid leak de-tector solution.

31. Make sure one of the regulator's secondary outlets is plugged. Draw a bubble of leak solution over the other regulator outlet. The bubble should hold for several se-conds when the regulator is pressurized. If any leaks are found, the regulator must be replaced. If no leaks are found, the regulator can be reinstalled and returned to service.

Produit Tag:

Personne à contacter: Mrs. Carrie Liu

Téléphone: +86 13855195806

Télécopieur: 86-551-63664756

Autres Produits

Pièces d'installation carburant de mélangeur de gaz du modèle CA125 6 IMPCO d'UL

Description de partie: mélangeur

numéro de la pièce: CA125-6

Marque: IMPCO

Type de gaz: Gaz naturel de vapeur de LPG

Résumé d'IMPCO/gaz à basse température DG200M 2 équipement de mélange de 2 gaz

Nom de produit: mélangeur

Type de carburant: Gaz à basse température de résumé

Position de montage: Vertical

Matériel de diaphragme: Hydrin (standard), silicone (facultatif)

Kits de réparation du modèle J IMPCO de diaphragme de silicone

Nom de produit: Kit de réparation

numéro de la pièce: RK-J-2

Marque: IMPCO

Diaphragme: Silicone (jaune)

Pièces standard d'installation carburant de la soupape à air RK CA55 2 IMPCO

Nom de produit: Kit de réparation

numéro de la pièce: RK-CA55-2

Marque: IMPCO

Rapport air-carburant: Maigre

Kits de réparation du diaphragme RK VFF30 3 IMPCO de silicone de Fluoro

Nom de produit: Kit de réparation

numéro de la pièce: RK-VFF30-3

Marque: IMPCO

Diaphragme: Silicone de Fluoro

Pièces codées noires d'installation carburant de réparation de cobra de Diapragm Impco

Pièces codées noires d'installation carburant de réparation de cobra de Diapragm Impco

Kit de réparation de cobra d'Impco de COBRA de RK

Kit de réparation codé de cobra de Diapragm Impco

Pièces d'installation carburant de réparation de cobra

Installations carburant d'Impco PF 052FM,

450098 001 pièces d'installation carburant,

Micron PF 052FM de la filtration 15